SOLID 4 Rack
SR-902W


The SOLID 4 Rack is wall-mounted and will hold 4 boards with fins vertically or up to 8 boards with detachable fins vertically when the rack is double loaded.

A SOLID fastening and safety tie-off kit is included in each pack.

Works in conjunction with SOLID Tail Protector SA-914B, SOLID Foam Protector Strip SA-921B, SOLID 2 Rack Accessory SA-905W and SOLID 8 Rack SR-901W.

Recommended retail price: $89.95

Dimensions: 740mm L x 80mm W x (450mm from back board to tip of foam dowel) x 33mm thick back board. 140mm between foam dowels.

The SOLID 8 RACK comes fully assembled, with a SOLID fastening and safety tie-off kit provided (illustrated below).

Works in conjunction with SOLID Tail Protector SA-914B, SOLID Foam Protector Strip SA-921B, SOLID 2 Rack Accessory SA-905W and SOLID 4 Rack SR-902W.

SOLID 8 Rack
SR-901W

The SOLID 8 Rack is wall-mounted and holds either 4 surfboards horizontally or 8 surfboards vertically. It can be double loaded where fins are detachable to accommodate 8 boards horizontally or up to 16 boards vertically, provided the SOLID load limit of 17kgs per two horizontal supports is not exceeded.

This SOLID storage system is a best seller because it provides the perfect solution for everyone by allowing individual customisation in height, length and width.

Recommended retail price:  $149.95

Dimensions: 740mm L x 80mm W x (450mm from back board to tip of foam dowel) x 33mm thick back board. 140mm between foam dowels.

SOLID stainless steel safety tie-offs are provided with this rack for extra security so that your boards are protected from damage at all times.

Designed for installation areas where space is more limited, the SOLID 9 Angled Rack holds a large quantity of boards easily and efficiently. The SOLID angle is utilised to create a reduction in depth and an improvement in board visability.

The depth of this rack has been condensed from the 450mm depth of our standard racks to 380mm, allowing floor space to be maximised. It is an ideal SOLID storage solution for surf retail outlets or wherever floor space is limited.

Recommended retail price:  $295.00

Dimensions: 2400mm L x 80mm W x (400mm internal D from base
to tip of foam dowel).

of 2400mm to fit all standard garage ceilings.

SOLID 12 Racks have been installed in Surf Retail outlets nationwide, proving their strength and reliability as well as their SOLID brand appeal. 

  SOLID stainless steel safety 
  tie-offs included.

Works in conjunction with SOLID Tail Protector SA-914SLB and SOLID Foam Protector Strip SA-921SLB.

SOLID 12 Rack
SR-906W

The SOLID 12 Rack will hold 12 surfboards vertically of different shapes and sizes with fins, or up to 24 boards with detachable fins.

2 sets of SOLID 12 Racks will store 12 surfboards horizontally of different shapes and sizes with fins, or up to 24 with detachable fins.

SOLID 12 Racks are cleverly designed with a vertical height

 Recommended retail price:  $249.95

This SOLID design can also be modified to hold other types of surfcraft and can be tailored to suit your individual needs. Ideal for surf clubs and surf craft retailers.

SOLID vinyl padding covers every arm of this rack, so when lifting the heaviest beast, damage is avoided and your expensive weapons are safe, SOLID and protected.

Recommended retail price:
$549.95  - SR-9183MP -  holds 3
$995.00  - SR-9186MP -  holds 6

Dimensions: 3 arm model: 1070mm H x 850mm D x 240mm between rails. 6 arm model: 2100mm H x 850mm D x 168mm between rails.

SOLID Paddle Board Racks are available in both 6 rack and 3 rack versions and have been specifically designed and constructed to horizontally store any heavy surfcraft of up to 50 kgs in weight (per 2 horizontal supports).


This unique SOLID system will display your massive quiver with ease. It can also safely and effortlessly store the biggest mals, kite boards, sail boards or any other type of board that fits the storage space. If your wall is strong enough then this SOLID monster rack will do the work for you.


The SOLID Paddle Board Rack is constructed from durable marine grade ply. Built to with-stand the elements, this rack is perfect for outdoor installation.

SOLID
Paddle Board Rack
SR-9183MP (holds 3)
SR-9186MP (holds 6)


The SOLID Paddle Board Rack was initially custom-designed for Tom Carroll to store his new obsession the paddleboard, which was introduced to him in Hawaii.

The SOLID Snow & Skate Rack is an ideal product for anyone who requires a SOLID storage system for their expensive sporting equipment.

It will horizontally hold 4 snowboards, skateboards, sets of snow skis, wake-boards, water skis or any combination not exceeding the 17kg weight limit per 2 horizontal supports.

The SOLID Snow & Skate Rack is a versatile and multi-functional system which can also be installed for vertical storage if required, allowing installation to suit your individual storage needs.

It is a shallow version of our SOLID 8 Rack and has the clearance to stow your snowboard without having to detach its bindings.

The SOLID Snow & Skate Rack will maximise precious storage space in your home, garage or lodge.


Note: This rack comes as a set only.

Works in conjunction with SOLID Foam Protector Strip SA-921B and SOLID Tail Protector SA-914B.

Dimensions:
Single: 740mm H x 80mm W x (305mm from back board to tip of foam dowel).

Recommended retail price:  $129.95

The SOLID Snow Ski Rack holds 3 sets of snow skis vertically between SOLID heavy-duty foam dowels.

Skis are thus kept safe and SOLID, preventing damage and allowing you to manage

space in your home or garage efficiently and effectively.

A lockable SOLID Snow Ski System for lodges and retailers is also available upon request.

3. As a stand-alone - Installed independently as a stand-alone rack, this SOLID baby will hold 4 boards vertically or 2 horizontally and can be double-loaded when stowing boards with detachable fins.

Works in conjunction with SOLID Surf & Snow Ceiling Rack SR-903W, SOLID Surf Craft Ceiling Rack SR-904W, SOLID Tail Protector SA-914B and the entire SOLID wall-mounted rack range.

Recommended retail price:  $99.95

Dimensions:
365mm L x 80mm W x (450mm D from base to tip of foam dowels).